Matek System F722 SE F7 Dual Gyro Flight Controller for DIY IMG1 Drones

Matek System F722 SE F7 Dual Gyro Flight Controller for DIY IMG2 Drones

Matek System F722 SE F7 Dual Gyro Flight Controller for DIY IMG3 Drones

Matek System F722-SE F7 Dual Gyro Flight Controller for DIY Drones

Name: Matek System F722-SE F7 Dual Gyro Flight Controller for DIY Drones - Maison Du Drone
SKU: MDD32989089450
Price: 71.90 EUR
Availability: OutOfStock

71.90€

F7 Double Gyro / ACC Flight Controller Board
MCU: STM32F722RET6 216MHz
IMU: MPU6000 & ICM20602, Integrated Dual Gyro (SPI)
Baro: BMP280 (I2C)
OSD: AT7456E (SPI)
Blackbox: MicroSD card slot (SPI)
Firmware: BetaFlight / INAV
Target: MATEKF722SE
Size: 36x46mm
Mounting hole: 30.5×30.5mm
Weight: 10g

Included :
1x F722-SE F7 Flight Controller
1x PCB plate FR4 36 x 36 x 1mm
1x Rubycon ZLH 35V / 470uF (low ESR)

Out of stock

SKU: MDD32989089450 Category: DIY Flight Controllers Tags: accessories, detached pieces, diy, drone, flight controller, menu, module, quadcopter, rooms

Description
Reviews (0)

PDB Specifications:
Input: 6 ~ 36V (3 ~ 8S LiPo) with TVS protection
PDB: 4x35A (Max.4x46A)
BEC: 5V 2A cont. (Max.3A)
LDO 3.3V: Max.200mA
184A current sensor (scale 179)
Battery voltage sensor: 1:10 (scale 110)

Characteristics :
5x Uarts (1,2,3,4,6) with integrated inversion
1x Softserial supported
8x Dshot / Proshot / oneshot outputs
1x I2C
4x RX6 pads (one per horn) for BLheli32 ESC telemetry
4x individual ESC power / signal pads
1x G / S1 / S2 / S3 / S4 pad group for 4in1 ESC Signal / GND
3x LED for STATUS (blue, green) and 3.3V indicator (red)
Vbat filtered output power for VTX, switchable via AUX (tab-user1 modes)
Dual Image Camera switchable via AUX (tab-user2 modes)
Camera control: Yes
Smartaudio & Tramp VTX protocol: Yes
WS2812 LED strip: Yes
Buzzer: Yes
RSSI: Yes
Additional ADC for analog speed INAV