BEITIAN BN-180 GPS module for DIY Racing Drones

Specifications:
M8030-KT Chipset
Reception format: GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS
Frequency: GPS L1, GLONASS L1, BeiDou B1, SBAS L1, Galileo E1
Channels: 72 search channels

Sensitivity:
Tracking: -167dBm
Reacquisition: -160dBm
Cold start: -148dBm
Hot start: -156dBm

Precision :
Horizontal position: 2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky)
Speed: 0.1m / sec 95% (SA off)
Timing: 1us synchronized to GPS time

Acquisition time:
Cold start: 26s
Hot start: 25s
Hot start: 1s

Data and update rate:
Support rate: 4800bps to 921600bps, Default 9600bps
Data level: TTL or RS-232, Default TTL level
Data protocol: NMEA-0183 or UBX, NMEA-0183 by default
Simple GNSS: 1Hz-18Hz
Simultaneous GNSS: 1Hz-10Hz, 1Hz default

Operational limits:
Altitude: 50,000 m Max
Speed: 515m / s Max
Acceleration: Less than 4g

Power consumption :
VCC: DC voltage
3.0V-5.5V, Typical: 5.0V
Current: Capture 50mA / 5.0V
Operating temperature: -40 ° C to + 85 ° C
Storage temperature: -40 ° C to + 105 ° C

Indicator:
TX LED: blue: data output, TX LED flashing
PPS LED: red: PPS LED off when GPS is not attached, flashing when attached

Wiring :
GND, TX output, RX input, VCC (3.0v-5.5v)

Included :
1 x BN-180 GPS module
Cables 2 x 15cm